Door Seals – MF-S1 Compression Seal
The MF-S1 Compression Seal is used mainly to seal butt joints. As a result, gaps between 3-9 mm are sealed effectively. Furthermore, minimal force is required to achieve seal compression.
- Importantly, MF-S1 is Emission free and certified for permanent museum use.
- Secondly, it is suitable for interior and exterior applications
- Thirdly, it is easily attached using MF-T8, a double-sided clear adhesive tape
- Lastly, it is available in clear in rolls of 25 metres (82 feet). Other colours may be available on request.
Door Seals – MF-S2 Brush/Swipe Seal
The MF-S2 Brush/Swipe Seal is attached to the leading edge of glass panels. Importantly, a perfect fit is ensured in the closed door position. Similarly, doors can still be opened and closed with minimal seal resistance.
Furthermore, when attached to doors it can be used on a single edge for gaps between 3-5mm, or both opposing edges for gaps between 8-10mm.
Lastly, the seal is made from age-resistant permanent elastic silicon for high durability sealing.
- Like our MF-S1 seal, this seal is emission free and certified for permanent museum use.
- It is also suitable for interior and exterior applications.
- It is easily attached using MF-T8, a double-sided clear adhesive tape.
- Available in clear, with other colours available on request.
- Available in rolls of 25 metres (82 feet)
Door Seals – MF-T8 Adhesive Tape
The MF-T8 adhesive tape is designed specifically for use with silicone seals.
Firstly on one side is a firm adhesive coat that is sensitive to silicone pressure. Secondly on the other side is a high performance acrylic adhesive coat.
- Emission free (Certified for permanent museum use)
- For use with all Manfred Frank Seals
- Available in clear
- Available in rolls of 33 metres (108 feet)
MF-TL1 Door Kit Tool
This tool was created to dismantle our single point door mount (the D01) so that changes or maintenance can be easily completed. The tool is made from hardwood and neoprene. The suction part of the tool allows the cap to be easily removed without causing damage to the stainless steel.
